Fabric Inspection is done in grey form or finished form. The inspection of fabric is a procedure by which the defects of fabric are identified and fabric is classified according to degree or intensity of defects. The fabric inspection is done for both grey and finished fabric.
Grey Fabric Inspection: After producing grey knit or woven fabric it requires to check out any types of fabric faults before sending in dyeing section. Most of the fabric manufacturing companies inspect grey fabric according to 4 point system.
Finished Fabric Inspection: The final product should pass against the norms given by the buyer. The following tests are done-
- Shade check
- GSM test
- Width or diameter test
- Shrinkage test
- Crocking test
- Pilling resistance test
- Color fastness to wash
- Color fastness to water
- Color fastness to perspiration
- Dimensional stability
- WPI & PPI
Different types of fabric faults can be found in a dyed finished fabric. The following defects are found in the final inspection.
- Uneven shade
- Oil spot
- Neps
- Crease mark
- Machine Stoppage mark
- Listing
- Line mark
- Pick missing
- Double yarn
- Dead cotton
- Bowing
- Fly yarn contamination
So, find out the defects of the finished goods and try to reduce the faults of the fabric.
Post a Comment