Effluent Transfer Plant is the essential part of a Textile Industry.
As the consciousness about environment has been drastically increased;
the research, talks about ETP also been increased.
ETP Plant consists of some basic steps. From the very beginning of Water accumulating to the final purified water has some processing procedures. These are –
Primary Filtration: Primary Filtration is the very first step of this process where the effluents are being filtered by the primary layer. In this step some bigger substitutes and materials of textiles are filtered.
Cooling & Mixing: In this step the dirty water with other wasted materials are being cooled so that these can be processed at later step.
Neutralized By Acid or Alkali Dozing: Wasted effluents should be neutralized as it will be taken for Chemical treatment. While you apply chemicals it might produce several reactions on sludge, water and materials. So, its better to neutralize all of the effluents and its adjacent materials.
Chemical Co-Agulation: In this process of ETP; all of the chemicals is applied for coagulation.
Setting & Separation of Sludge: After the Chemical reaction; effluents are separated from the sludge and wasted sludge are taken out from another pipe or lines.
Sludge Pit: Sludge Pit is one kind of solid Sludge that is formed after the separation from the effluent itself.
Filtration: Sludge pit is easy to filter as it is in solid formed from the previous step.
Discharge To Drain: There are several Drains are settled in order to taken out all of the sludge and dirty pit from this plant.
This is how Effluent Transfer Plant is being processed.
ETP Plant consists of some basic steps. From the very beginning of Water accumulating to the final purified water has some processing procedures. These are –
Primary Filtration
Cooling & Mixing
Neutralization by Acid or Alkali Dozing
Chemical Co-agulation
Setting & Separation of Sludge
Sludge Pit
Filtration
Discharge To Drain
This is very basic steps of Effluent Transfer Plant. Here i am going to give you are basic concept of each process steps of ETP.Primary Filtration: Primary Filtration is the very first step of this process where the effluents are being filtered by the primary layer. In this step some bigger substitutes and materials of textiles are filtered.
Cooling & Mixing: In this step the dirty water with other wasted materials are being cooled so that these can be processed at later step.
Neutralized By Acid or Alkali Dozing: Wasted effluents should be neutralized as it will be taken for Chemical treatment. While you apply chemicals it might produce several reactions on sludge, water and materials. So, its better to neutralize all of the effluents and its adjacent materials.
Chemical Co-Agulation: In this process of ETP; all of the chemicals is applied for coagulation.
Setting & Separation of Sludge: After the Chemical reaction; effluents are separated from the sludge and wasted sludge are taken out from another pipe or lines.
Sludge Pit: Sludge Pit is one kind of solid Sludge that is formed after the separation from the effluent itself.
Filtration: Sludge pit is easy to filter as it is in solid formed from the previous step.
Discharge To Drain: There are several Drains are settled in order to taken out all of the sludge and dirty pit from this plant.
This is how Effluent Transfer Plant is being processed.
This is most informative and also this post most user friendly and super navigation to all posts.
ETP Plant Manufacturer
Post a Comment